1, software leather shoes fabric: you can choose one of the following methods, depending on its effect, you can use more than one method: you can use a piece of wet sponge to rub the foot parts of the shoe leather wet, to be an hour on some softening, and then wear it won't be so difficult. You can also use white wine or a little white vinegar to wipe the foot parts of leather shoes, soaking wet about 5-15 minutes, hair dryer hot air blowing, hand gently rubbing hard to soften the heel, wait for it to be slightly soft, and then put on the walking, dry after the foot is not abrasive. Use your hand to gently knead the abraded foot parts to make the shoes soft, or use a wet cloth to cover the abraded place, then use a small hammer to gently smash it repeatedly, but do not use too much force, so as not to make the upper wrinkled. Note: soften the leather, has a certain feasibility, but will also reduce the life of leather shoes to a certain extent, is not conducive to the protection of leather shoes.

2, let the leather shoes fabric soften naturally. Natural softening is good, you can use tape in the early part of the shoe and foot grinding place to stick, after a period of time will not be too abrasive feet and then remove the tape.

3、Wear slightly thick socks. When wearing shoes, you must wear thicker socks to reduce the friction between your feet and shoes.

4、Pad on the insole. If you wear leather shoes when walking, feel the foot sliding inside the shoes, then be sure to pad the insoles, the foot does not slide, the same friction will be reduced.

The above is a small number of methods for you to introduce, shoes wear feet so do, I hope to help you Oh, you learn?